// AI İçerik Üretimi — 2026-11-11 — 7 min
Fixing Just One Part of an AI Image Instead of Regenerating It: How Inpainting Works
Lighting, composition, everything's right except one corner came out wrong? Inpainting lets you fix just that spot without losing the rest.
You generate a product shot of a pillow: the lighting is exactly right, the fabric texture looks great, the composition is sitting well — but the brand logo on the product came out blurry and unreadable. The first instinct is "let's just regenerate it," but try that ten more times and the lighting shifts, the fabric folds differently, the composition drifts — you risk everything you liked about it. What you actually need is to keep 95% of the image exactly as it is and change only that small region. That's inpainting, and anyone who doesn't know about it ends up regenerating the same image dozens of times, burning time and credits.
##What Inpainting Actually Does
Inpainting lets you draw a mask (a selected region) over the image, and the model only regenerates what's inside that mask — every pixel outside it stays exactly as it was. This shouldn't be confused with two other things: a full regeneration reinterprets the entire scene — lighting, composition, even the product's pose can shift; img2img nudges the whole image a little, meaning every part changes at least slightly. Inpainting is different from both: the model reads the pixels outside the mask as context (light direction, color temperature, perspective) and generates new content only inside the mask that matches that context. That's why you can fix a pointed problem — a logo, a hand, a background object, a stain on a surface — without losing the rest of the image. It's exactly why professionals almost never reach for a full regeneration when fixing an image.
##How to Pick the Mask and Write the Prompt
The mask you draw affects the result as much as the generation itself. A mask drawn too tight — right up against the object's edge — can leave a visible "seam," because the model has no room to blend the new content smoothly with the old; a mask that's too wide puts more of the image at risk than necessary. In practice, leaving a small margin around the problem area works best — a few pixels of feathering gives the model room to blend the edge naturally. The same logic applies to the prompt: describe only what's inside the mask, but fold in the surrounding context too (something like "a sharp, legible brand label on a white cotton pillow, matching the fabric's folds") — the model generates based on both the mask's content and the light spilling in from outside it.
- Draw the mask with a thin margin around the object, not flush against its edge — this cuts the risk of a visible seam
- Describe only what's inside the mask in the prompt, but fold in the light/material context too
- If you have a reference image (the real logo, the real product pattern), attach it — the model learns far more accurately from pixels than from words
- Don't expect perfection in one pass: fix the general shape first, then run a second inpainting pass to sharpen the detail (text, an edge)
- Describe the job to LuviBot in plain language and it suggests the mask size and prompt structure that tends to work for that kind of fix, so you're not starting from zero
- If the same kind of fix (say, sharpening a logo) keeps coming up, save it as a 'fix template' in the TEAMS project library — the next person on the team doesn't have to rediscover the same mask-and-prompt combination from scratch
##A Real Job: A Blurry Logo and an Odd Hand on a Pillow Product Shot
Picture a home-textiles seller's order: a velvet pillow on a sofa, with a hand lightly resting on it in the composition. The first image, generated with the model LuviBot suggested, is good overall — the lighting, fabric texture, and composition are all exactly right — but two things are off: the brand label on the pillow came out as a blurry smudge, and the hand's fingers don't sit naturally. Instead of regenerating from scratch, the seller runs two separate inpainting passes. First, a thin mask over the label area, with the real logo image attached as a reference, and the prompt "a sharp, legible brand label on the pillow, matching the fabric's folds" — the second attempt comes out clean. Then the hand gets masked with the prompt "a hand naturally and lightly resting on the pillow, realistic finger position"; the first attempt still looks a bit off, so the mask gets widened slightly and tried again, and the result looks natural. In total, four small inpainting passes get the image ready for delivery — trying to solve the same problem by regenerating from scratch would likely have taken fifteen to twenty full generations, since the lighting and composition would keep drifting with every attempt.
##Where It Struggles, and What It Costs
To be honest, inpainting doesn't solve everything in one pass. Small, dense text (like fine print on a label) can still come out blurry sometimes and may need two or three rounds; hands and fingers are far better than they used to be but not perfect, and a complex grip angle often needs one or two extra tries; if a reflection or shadow crosses right over the mask's edge, a mask drawn too tight can leave a visible line — widening the margin usually fixes it. On cost: one inpainting pass typically uses credits roughly equal to or less than a full image generation, but the real savings show up in the total number of attempts — since you're retrying just the problem area instead of the whole image over and over, the total credits spent to finish the job usually come out noticeably lower.
Attempts to reach the same result by full regeneration
15–20 full generations
Attempts to reach it with inpainting
3–5 small fixes
Credit cost of one fix pass
roughly equal to or less than a full generation
##FAQ
>What's the difference between inpainting and img2img?
Img2img reinterprets the whole image to some degree — every pixel carries some risk of changing. Inpainting only changes what's inside the mask you draw; everything outside it stays pixel-for-pixel the same. If you need to fix one specific area, inpainting is almost always the safer choice.
>Why does a visible line show up at the edge of the mask, and how do I fix it?
This usually happens when the mask is drawn flush against the object's edge, leaving the model no room to blend the new content smoothly with the old. Leaving a few pixels of feathering margin around the mask almost always removes the line entirely.
>What kind of jobs is inpainting not suited for?
If the composition itself needs to change — the product's angle, the whole scene, the camera angle — inpainting is the wrong tool; regenerating from scratch is faster at that point. Inpainting is strongest when the overall image is right and just one spot came out wrong.
>How do I speed up repeated fixes across a team?
If the same type of error keeps showing up (a blurry logo, an odd hand position, a specific product pattern), save the mask size and prompt combination that worked into the TEAMS library — you can also wire it into a workflow node — so everyone on the team isn't rediscovering the same fix from scratch.
If you want to take an image you already have and get it delivery-ready without regenerating it from scratch — just fixing the part that's wrong — open an account today and try it on a real image you're working on. Inpainting on LUVI Creator exists for exactly this job.
// LET'S WORK
Planning a similar SaaS product?
We can define scope, MVP milestones, and a realistic delivery timeline together.
> CONTACT